Aileron Question

[Fangar]

I have seen this mentioned before, but was hoping to get more specific instruction. I have the Hitec Micro 05ms receiver. I am having a tough time getting the two aileron servos to function properly. As it stands now with the Futaba 7C transmitter, the left aileron comes in on Channel 6 which is the flap knob. Don't see how to get it linked up with the Channel 1 (Right Aileron). Am I missing something obvious?

Currently I have the following on the receiver inputs:

Channel 1 : Right Aileron
Chennel 2: Elevator
Channel 3: Throttle (ESC with combined lipo input)
Chennel 4: Rudder
Batt / 5: Left Aileron

Thanks in advance,

James M.

[Fangar]

Somtimes asking the question forces you to think enough to answer your own question....


For anyone else. The setup mentioned above was correct. I forgot to activate the Flaperon setting within the Transmitter. Works now.

Cheers,

Fangar

[Coonak]

I used a short 'Y-Harness' ;)